Kenwood DPX-9021MPi

Kenwood DPX-9021MPi

From the press release: “It is an MP3 compatible MD / CD receiver that uses an electric full open panel system. Equipped with a “3D moving picture display” that enables realistic and three-dimensional display on the large display unit unique to 2DIN. The character display unit is equipped with a 2-line display tube that supports Chinese characters, and displays a variety of information including the display of Chinese characters for MP3 file names / ID3 tags. In addition to the traditional ISO9660, the MP3 file system also supports Romeo and Joliet extended formats. In addition, the popular mobile phone hands-free function has been upgraded and installed to expand the number of compatible models, the caller name display when receiving a call is supported by the audio registration memory, and the optional steering remote control * 1 is used for complete hands-free support . The usability has been greatly improved. In terms of sound quality, it is fully equipped with technologies related to sound quality improvement such as “FOCUS GND”, “NIICIRCUIT”, “Digital Direct”, and “Separate Power IC”. A solid bass and a clear, well-grained treble are achieved. In addition, “Full Spec DSP”, “9BAND Equalizer”, and “TIME DELAYED CONTROL” that improve the sense of localization and presence make it possible to create the desired sound quality suitable for the passenger compartment. It is also equipped with an “Amplifier Delete Circuit” that turns off the music signal line to the built-in amplifier when an external amplifier is connected, and draws out its specifications to the full when an external amplifier is connected. CD-R / RW compatible, MDLP compatible, built-in 50W x 4ch ultra-high power amplifier, FM teletext reception possible, remote control included.

* 1: KCA-SR700, tax not included 3,000 yen”

[MD Department]

• Frequency response: 20Hz to 20kHz (±1dB)
• S/N ratio: 93dB (1kHz)
• Dynamic range: 93dB
• Stereo Separation: 85dB

[CD section]

• Frequency response: 10Hz to 20kHz (±1dB)
• S/N ratio: 95dB (1kHz)
• Dynamic range: 95dB
• Stereo Separation: 88dB
• MP3 decoder: MPEG-1.0 Audio Layer-3 compliant

[FM section]

• Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)

[AM section]

• Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ

[EQ section]

• Equalizer center frequency: 60,120,250,500,1k,2k,4k,8k,16kHz
• Variable range: ±12dB

[Audio part]

• Maximum output: 50W x 4
• Rated output: 30W x 4 (4Ω, 1kHz, 10%THD)
• Pre-out level: 1500mV (FM/10kΩ)

[Common part]

• Power supply voltage: 14.4V (11 to 16V)
• Maximum current consumption: 10A
• Embedded dimensions: 178 (W) x 100 (H) x 155 (D) mm
• Mass: 3.3kg

Content adapted from: Kenwood Press Release

Kenwood DPX-9021MPi User Manual JP

Submit your own! Edit the page, use the photo submission form, or Contact us.